Articles scientifiques
Total : 132
ACL-2024-016. Sourd J., Tencé S., Gaudin É. and Burdin S. Nonlocal Kondo coupling and selective doping from cerium f electrons in iron-based superconductors. Phys. Rev. B: Condens. Matter Mater. Phys. 2024 vol. 109, n°4, p. 045117. WOS / DOI / HAL
ACL-2024-012. Wu Z., Sun W., Mao A., Zhu Q., Chen X., Zhang X., Trinh L., Li N., Huang X., Kraiem N., Silvain J.-F., Cui B. and Lu Y. Diamond coatings on femtosecond-laser-textured stainless steel 316 surfaces for enhanced adherence. Diamond Relat. Mater. 2024 vol. 142, p. 110744. WOS / DOI / HAL
ACL-2024-010. Bident A., Delange F., Labrugère C., Debiemme-Chouvy C., Lu Y. and Silvain J.-F. Fabrication and characterization of copper and copper alloys reinforced with graphene. J. compos. Mater. 2024 vol. 58, n°1, p. 109-117. WOS / DOI / HAL
ACL-2024-008. Legrée M., Gaudin É., Huot J. and Bobet J. L. Microstructure and hydrogenation properties of RETMMg15 (RE= Nd, Gd; TM= Cu, Ni) alloys. Int. J. Hydrogen Energy 2024 vol. 51, p. 695-701. WOS / DOI / HAL
ACL-2024-002. Wu Z., Huang X., Sun W., Dong H., Mao A., Cui B., Silvain J.-F., Wang X. and Lu Y. Time-resolved imaging of microscale dynamics in laser drying of silicon wafers. Appl. Surf. Sci. 2024 vol. 645, p. 158844. WOS / DOI / HAL
ACL-2023-133. Zahid M., Touili S., Amjoud M. B., Mezzane D., Gouné M., Uršič H., Šadl M., Elamraoui Y., Hoummada K., Kutnajk Z. and El Marssi M. Dielectric and energy storage properties of surface-modified BaTi89Sn0.11O3@polydopamine nanoparticles embedded in a PVDF-HFP matrix. RSC Adv. 2023 vol. 13, n°7, p. 26041-26049. WOS / DOI / HAL
*ACL-2023-129. Poupart R., Invernizzi R., Guerlou-Demourgues L., Olchowka J., Dourges M.-A., Bobet J.-L., Deleuze H. and Backov R. Kraft black liquor as a carbonaceous source for the generation of porous monolithic materials and applications toward hydrogen adsorption and ultrastable supercapacitors. Langmuir 2023 vol. 39, n°46, p. 16385-16394. WOS / DOI / HAL
*ACL-2023-126. Bident A., Caillault N., Delange F., Labrugère C., Aubert G., Aymonier C., Durand E., Demourgues A., Lu Y. and Silvain J.-F. Nitrogen radiofrequency plasma treatment of graphene. ChemistrySelect 2023 vol. 8, n°41, p. e202303661. WOS / DOI / HAL
ACL-2023-125. Cuzacq L., Polido C., Silvain J. F. and Bobet J. L. Hydrogen production properties of aluminum–magnesium alloy presenting β-phase Al3Mg2. Metals (Basel, Switz.) 2023 vol. 13, n°11, p. 1868. WOS / DOI / HAL
*ACL-2023-124. Silvain J. F., Gifford D. L., Fourcade S., Cuzacq L., Grosseau-Poussard J.-L., Debiemme-Chouvy C., Tessier Doyen N. and Lu Y. Study on debinding and sintering conditions in extrusion-based additive manufacturing of 316L and 316L + Cu. Metals (Basel, Switz.) 2023 vol.13, n°11, p. 1858. WOS / DOI / HAL
ACL-2023-106. Gaüzère L., Besnard C., Pontoreau M., Carlotti S., Couillaud S. and Heintz J. M. Influence of the acrylamide-based monomer on the sintering of ceramics shaped by gelcasting. Open Ceramics 2023 vol. 16, p. 100447. WOS / DOI / HAL
*ACL-2023-105. Cornet L., Guené-Girard S., Heintz J. M., Boulesteix R., Maître A. and Jubera V. Ho3+-doped Y3NbO7 transparent ceramic elaborated by air pre-sintering and post-HIP treatment as potential LASER gain material at 2 μm. Opt. Mater. (Amsterdam, Neth.) 2023 vol. 144, p. 114319. WOS / DOI / HAL
ACL-2023-093. Gorsse S., Gouné M., Lin W.-C. and Girard L. Dataset of mechanical properties and electrical conductivity of copper-based alloys. Sci. Data 2023 vol. 10, p. 504. WOS / DOI / HAL
ACL-2023-092. Li N., Huang X., Dong H., Duan B., Zhu Q., Mao A., Li P., Cui B., Silvain J.-F. and Lu Y. Gold-coated nanoripples produced by UV-Femtosecond lasers for surface enhanced Raman spectroscopy. Appl. Surf. Sci. 2023 vol. 636, p. 157794. WOS / DOI / HAL
ACL-2023-088. Huang X., Liu L., Lu Y., Dong H., Mao A., Li P., Cui B., Silvain J.-F. and Lu Y. Chemical element variation in fungi-induced coating degradation using laser-induced breakdown spectroscopy combined with Raman spectroscopy, mass spectrometry, and multivariate analyses. J. Anal. At. Spectrom. 2023 vol. 38, n°8, p. 1668-1675. WOS / DOI / HAL
ACL-2023-078. Liu L., Huang X., Dong H., Mao A., Li P., Cui B., Silvain J.-F. and Lu Y. Rapid nondestructive assessment of the degrees of sensitization of 5456 aluminum alloys using laser-induced breakdown spectroscopy (LIBS) with multivariate analysis. J. Anal. At. Spectrom. 2023 vol. 38, n°7, p. 1494-1500. WOS / DOI / HAL
ACL-2023-074. Dasari S., Sharma A., Gorsse S., Chesetti A. and Banerjee R. Non-classical nucleation of ordered L12 precipitates in the FCC based Al0.25CoFeNi high entropy alloy. J. Appl. Phys. 2023 vol. 134, n°1, p. 015102 (10 p.). WOS / DOI / HAL
ACL-2023-069. Pontoreau M., Dezellus O., Cardinal S., Pelletier J.-M., Chiriac S., Toche F., Steyer P., Gremillard L., Vallée M. and Boulnat X. Towards the additive manufacturing of Zr-based metallic glasses using liquid phase sintering: Reactivity and phase transformation kinetics at the crystalline/amorphous interface. J. Alloys Compd. 2023 vol. 962, p. 171179 (10 p.). WOS / DOI / HAL
ACL-2023-063. Dasari S., Sharma A., Jiang C., Gwalani B., Lin W.-C., Lo K.-C., Gorsse S., Yeh A.-C., Srinivasan S. G. and Banerjee R. Exceptional enhancement of mechanical properties in high-entropy alloys via thermodynamically guided local chemical ordering. Proc. Natl. Acad. Sci. U.S.A. 2023 vol. 120, n°23, p. e2211787120. WOS / DOI / HAL
*ACL-2023-060. Croisé C., Alabd K., Villesuzanne A., Can F., Courtois X., Gaudin E., Tencé S. and Bion N. Role of hydride ion within Ru/LaScSi and Ru/CeTiGe catalysts for NH3 synthesis: A combination of DFT and experimental nitrogen isotopic exchange studies. Catal. Commun. 2023 vol. 179, p. 106689 (11 p.). WOS / DOI / HAL
ACL-2023-058. Chen T.-W., Wang P.-T., Kang Y.-C., Wu B.-C., Tsou N.-T., Glatzel U., Gorsse S. and Yeh A.-C. Grain boundary serration tuning and its effect on hot workability of a wrought superalloy. J. Alloys Compd. 2023 vol. 960, p. 170620 (12 p.). WOS / DOI / HAL
ACL2023-055. Chen W., Hilhorst A., Bokas G. B., Gorsse S., Jacques P. J. and Hautier G. A map of single-phase high-entropy alloys. Nat. Commun. 2023 vol. 14, p. 2856 (10 p.). WOS / DOI / HAL
ACL-2023-049. Mao A., Mitsuboshi H., Trochon M., Zhang X., Trinh L., Keynia S., Fan P., Kraiem N., Huang X., Li N., Li P., Wu Z., Sun W., Cui B., Silvain J.-F., Hara M., Yoshimura M., Marshall K. L., Anthamatten M. and Lu Y. Evolution of chemical and mechanical properties in two-photon polymerized materials during pyrolysis. Carbon 2023 vol. 208, p. 384-389. WOS / DOI / HAL
ACL-2023-045. Serrano L., Moussa M., Yao J.-Y., Silva G., Bobet J.-L., Ferreira Santos S. and Cardoso K. R. Development of Ti-V-Nb-Cr-Mn high entropy alloys for hydrogen storage. J. Alloys Compd. 2023 vol. 945, p. 169289 (9 p.). WOS / DOI / HAL
ACL-2023-044. Yeh A.-C., Gorsse S., Keppens V. and Gilbert D. A. Design and development of high entropy materials. APL Materials 2023 11, n°3, p. 030402 (4 p.). WOS / DOI / HAL
ACL-2023-039. Gaudin É., Al Asmar E. and Bobet J. L. Hydrogen production by hydrolysis from Mg rich compounds and composites NdNiMg15-Mg: How to combine fundamental and applied science? J. Alloys Compd. 2023 vol. 947, p. 169592 (9 p.). WOS / DOI / HAL
ACL-2023-035. Moreau L. É., Gorsse S., Lambard G. and Murakami H. Microstructure and oxidation behavior of Co–Cr–Ta ternary alloys. J. Alloys Compd. 2023 vol. 936, p. 167968 (10 p.). WOS / DOI / HAL
ACL-2023-033. Moussa M., Gorsse S., Huot J. and Bobet J. L. Effect of the synthesis route on the microstructure of HfxTi(1−x)NbVZr refractory high-entropy alloys. Metals (Basel, Switz.) 2023 vol. 13, n°2, p. 343 (12 p.). WOS / DOI / HAL
ACL-2023-031. Rodríguez M., Urretavizcaya G., Bobet J.-L. and Castro F. J. Effective hydrogen production by hydrolysis of Mg wastes reprocessed by mechanical milling with iron and graphite. J. Alloys Compd. 2023 vol. 946, p. 169352 (9 p.). WOS / DOI / HAL
ACL-2023-030. Hansen M. F., Vaney J.-B., De Rango P., Salaün M., Tencé S., Nassif V. and Toulemonde P. In-situ deuteration study of LaFeSi into superconducting LaFeSi(H,D). J. Alloys Compd.2023 vol. 945, p. 169281 (6 p.). WOS / DOI / HAL
ACL-2023-024. Silvain J.-F., Thomas B., Constantin L., Pontoreau M., Lu Y., Grosseau-Poussard J.-L. and Lacombe G. Silver/reduced graphene oxide nanocomposite materials synthesized via a green molecular level mixing. J. Compos. Mater. 2023 vol. 57, n°4, p. 1-10. WOS / DOI / HAL
*ACL-2023-022. Croisé C., Alabd K., Tencé S., Gaudin E., Villesuzanne A., Courtois X., Bion N. and Can F. Influence of the rare earth (R) element in Ru-supported RScSi electride-like intermetallic catalysts for ammonia synthesis at low pressure: insight into NH3 formation mechanism. ChemCatChem 2023 vol. 15, n°3, p. e202201172 (12 p.). WOS / DOI / HAL
ACL-2023-020. Sawadogo M., Godin A., Duquesne M., Lacroix É., El Amine Hamami A., Belarbi R. and Veillere A. Investigation of eco-friendly and economic shape-stabilized composites for building walls and thermal comfort. Build. Env. 2023 vol. 231, p. 110026 (11 p.). WOS / DOI / HAL
ACL-2023-019. Lee J.-L., Wang P.-T., Lo K.-C., Shen P.-K., Tsou N.-T., Kakehi K., Murakami H., Tsai C.-W., Gorsse S. and Yeh A.-C. Effect of serrated grain boundary on tensile and creep properties of a precipitation strengthened high entropy alloy. Sci. Technol. Adv. Mater. 2023 vol. 24, n°1, p. 2158043 (13 p.). WOS / DOI / HAL
ACL-2023-011. Li N., Fan P., Zhu Q., Cui B., Silvain J. F. and Lu Y. Femtosecond laser polishing of additively manufactured parts at grazing incidence. Appl. Surf. Sci. 2023 vol. 612, p. 155833 (10 p.). WOS / DOI / HAL
*ACL-2023-010. Vardon A., Labarrère H., Nallet F., Chanut N., Weill F., Labrugère C., Bobet J. L., Ly I., Epron F., Especel C. and Backov R. Designing CuO–SiO2 and Cu0–SiO2 monolithic ceramics bearing hierarchical porosity toward robust and cycling CO oxidation properties. Chem. Mater. 2023 vol.35, n°1, p .228–241. WOS / DOI / HAL
ACL-2023-008. Legree M., Charbonnier V., Al Bacha S., Asano K., Sakaki K., Aubert I., Mauvy F., Sabatier J., Bobet J.-L. Hydrogen generation performances and electrochemical properties of Mg alloys with 14 H long period stacking ordered structure. J. Alloys Compd. 2023, vol. 937, p. 168154 (10 p.). WOS / DOI / HAL
ACL-2023-004. Chesetti A., Banerjee S., Dasari S., Kiran Nartu M. S., Varahabhatla S. M., Sharma A., Ramakrishnan A., Satko D., Gorsse S., Salem A., Banerjee R. 3D printable low density B2+BCC refractory element based complex concentrated alloy with high compressive strength and plasticity. Scr. Mater. 2023, vol. 225, p. 115160 (8 p.). WOS / HAL / DOI
ACL-2023-002. Chaudhary V., Nartu M. S. K. K. Y., Dasari S., Varahabhatla S. M., Sharma A., Radhakrishnan M., Mantri S. A., Gorsse S., Dahotre N., Ramanujan R. V., Banerjee R. Magnetic and mechanical properties of additively manufactured Alx(CoFeNi) complex concentrated alloys. Scr. Mater. 2023, vol. 224, p. 115149 (6 p.). WOS / DOI / HAL
ACL-2022-137. Donaday G., Caillaud S., Coeuret P., Moussa M., Cuzacq L., Bobet J.-L. Hydrogen generation from Mg wastes by cold rolling and ball milling by hydrolysis reaction: Elektron 21 (UNS-M12310) in simulated seawater. Metals (Basel, Switz.) 2022, vol. 12, n° 11, p. 1821 (9 p.). (FI=2.9/Q2). WOS / DOI / HAL
*ACL-2022-131. Silvain J. F., Boumali H., Bourret J., Geffroy P. M., Fourcade S., Batigne T., Sinno K., Lu Y., Constantin L. Porous 3D Cu structures with adaptive heat dissipation properties. MRS Commun. 2022, vol. 12, p. 753-758. (FI=1.9/Q4). WOS / DOI / HAL
ACL-2022-110. Hansen M. F., Vaney J. B., Lepoittevin C., Bernardini F., Gaudin E., Nassif V., Méasson M.-A., Sulpice A., Mayaffre H., Julien M.-H., Tencé S., Cano A., Toulemonde P. Superconductivity in the crystallogenide LaFeSiO1−δ with squeezed FeSi layers. npj Quantum Mater. 2022, vol. 7, p. 86 (8 p.). (FI=5.7/Q1). (FI=5.7/Q1). WOS / DOI / HAL
ACL-2022-107. Hanani Z., Mezzane D., Amjoud M. B., Lahcini M., Spreitzer M., Vengust D., Jamali A., El Marssi M., Kutnajk Z., Gouné M. The paradigm of the filler’s dielectric permittivity and aspect ratio in high-k polymer nanocomposites for energy storage applications. J. Mater. Chem. C 2022, vol. 10, n°30, p. 10823-10831. (FI=6.4/Q1). WOS / DOI / HAL
ACL-2022-101. Liu C.-J., Gadelmeir C., Lu S.-L., Yeh J.-W., Yen H.-W., Gorsse S., Glatzel U., Yeh A.-C. Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperatures. Acta Mater. 2022, vol. 237, p. 118188 (13 p.). (FI=9.4/Q1). WOS / DOI / HAL
ACL-2022-100. Kraiem N., Constantin L., Mao A., Cui B., Silvain J.-F., Lu Y. Influence of aluminum addition on the laser powder bed fusion of copper-aluminum mixtures. Addit. Manuf. Lett. 2022, vol. 3, p. 100080 (7 p.). (Non référencé). WOS / DOI / HAL
*ACL-2022-097. Guignard J., Prakasam M. and Largeteau A. High pressure (HP) in Spark plasma sintering (SPS) processes : application to the polycrystalline diamond. Materials (Basel, Switz.) 2022 vol. 15, n°14, p. 4804 (15 p.). (FI=3.4/Q3). WOS / DOI / HAL
ACL-2022-096. Cornu I., Cheype M., Baudier-Pons M., Léon J.-F., Couillaud S., Rossignol F. and Heintz J. M. Pixelated sintering of α-Al2O3. J. Eur. Ceram. Soc. 2022 vol. 42, n°13, p. 5885-5892. (FI=5.7/Q1). WOS / DOI / HAL
ACL-2022-091. Mailhé C., Gorsse S., Thirion B., Palomo E. and Duquesne M. High-throughput experiment for the rapid screening of organic phase change materials. J. Therm. Anal. Calorim. 2022 vol. 147, n°15, p. 8137-8143. (FI=4.4/Q2). WOS / DOI / HAL
ACL-2022-088. Hanani Z., Merselmiz S., Amjoud M. B., Mezzane D., Lahcini M., Ghanbaja J., Spreitzer M., Vengust D., El Marssi M., Luk’yanchuk I. A., Kutnajk Z., Rožič B. and Gouné M. Novel lead-free BCZT-based ceramic with thermally-stable recovered energy density and increased energy storage efficiency. J. Materiomics 2022 vol. 8, n°4, p. 873-881. (FI=9.4/Q1). WOS / DOI / HAL
ACL-2022-087. Brillon A., Heintz J. M., Constantin L., Pillet F., Lu Y., Silvain J.-F. and Debiemme-Chouvy C. Anisotropic thermal conductivity and enhanced hardness of copper matrix composite reinforced with carbonized polydopamine. Composites Commun. 2022 vol. 33, p. 101210 (5 p.). (FI=8/Q1). WOS / DOI / HAL
*ACL-2022-086. Legrée M., Bobet J.-L., Mauvy F. and Sabatier J. Modeling hydrolysis kinetics of dual phase α-Mg/LPSO alloys. Int. J. Hydrogen Energy 2022 vol. 47, n°55, p. 23084-23093. (FI=7.2/Q1). WOS / DOI / HAL
ACL-2022-085. Lo K.-C., Murakami H., Glatzel U., Yeh J.-W., Gorsse S. and Yeh A.-C. Elemental effects on the oxidation of refractory compositionally complex alloys. Int. J. Refract. Met. Hard Mater. 2022 vol. 108, p. 105918 (12 p.). (FI=3.6/Q1). WOS / DOI / HAL
ACL-2022-081. Gouty Q., Castro F. J., Urretavizcaya G., Sabatier J. and Bobet J.-L. Experimental and theoretical approach of the hydrolysis of pelleted magnesium alloys scraps. J. Alloys Compd. 2022 vol. 919, p. 165784 (7 p.). (FI=6.2/Q2). WOS / DOI / HAL
ACL-2022-077. Zahid M., Hadouch Y., Amjoud M. B., Mezzane D., Gouné M., Hoummada K., Alimoussa A., Razumnaya A. G., Rožič B. and Kutnajk Z. Enhanced near-ambient temperature energy storage and electrocaloric effect in the lead-free BaTi89Sn0.11O3 ceramic synthesized by sol–gel method. J. Mater. Sci. : Mater. Electron. 2022 vol. 33, n°16, p. 12900–12911. (FI=2.8/Q3). WOS / DOI / HAL
*ACL-2022-075. Degraeve B., Lefeuvre B., Rocton N., Herbert N., Hamrouni N., Haus G., Largeteau A., Prakasam M., Oudadesse H. and Merdrignac-Conanec O. Processing of highly porous bioglass monoliths by hydrothermal hot pressing. Ceram. Int. 2022 vol. 48, n°13, p. 18190-18198. (FI=5.2/Q1). WOS / DOI / HAL
ACL-2022-073. Mao A., Fan P., Constantin L., Li N., Huang X., Cui B., Silvain J. F., Wang X. and Lu Y. Forming three-dimensional micro-objects using two-dimensional gradient printing. Appl. Mater. Today 2022 vol. 28, p. 101538 (9 p.). (FI=8.3/Q1). WOS / DOI / HAL
ACL-2022-055. Hanani Z., Izanzar I., Merselmiz S., El Assimi T., Mezzane D., Amjoud M. b., Uršič H., Prah U., Ghanbaja J., Saadoune I., Lahcini M., Spreitzer M., Vengust D., El Marssi M., Kutnjak Z., Luk’yanchukeg I. A. and Gouné M. A flexible self-poled piezocomposite nanogenerator based on H2(Zr1Ti0.9)3O7 nanowires and polylactic acid biopolymer. Sustainable Energy Fuels 2022 vol. 6, n°8, p. 1983-1991. (FI=5.6/Q2). WOS / DOI / HAL
ACL-2022-050. Brillon A., Garcia J., Riallant F., Garnier C., Joulain A., Lu Y. and Silvain J. F. Characterization of Al/B4C composite materials fabricated by powder metallurgy process technique for nuclear applications. J. Nucl. Mater. 2022 vol. 565, p. 153724 (11 p.). (FI=3.1/Q3). WOS / DOI / HAL
*ACL-2022-045. Guignard J., Prakasam M. and Largeteau A. A review of binderless polycrystalline diamonds: focus on the high-pressure-high-temperature sintering process. Materials (Basel, Switz.) 2022 vol. 15, n°6, p. 2198 (36 p.). (FI=3.4/Q3). WOS / DOI / HAL
*ACL-2022-039. Vaney J.-B., Vignolle B., Demourgues A., Gaudin E., Durand E., Labrugère C., Bernardini F., Cano A. and Tencé S. Topotactic fluorination of intermetallics as an efficient route towards quantum materials. Nat. Commun. 2022 vol. 13, p. 1462 (9 p.). (FI=16.6/Q1). WOS / DOI / HAL
*ACL-2022-026. Bronchy M., Roach L., Mendizabal L., Feautrier C., Durand E., Heintz J. M., Duguet É. and Tréguer-Delapierre M. Improved low temperature sinter bonding using silver nanocube superlattices. J. Phys. Chem. C 2022 vol. 126, n°3, p. 1644-1650. (FI=3.7/Q2). WOS / DOI / HAL
ACL-2022-020. Rodríguez M., Niro F., Urretavizcaya G., Bobet J.-L. and Castro F. J. Hydrogen production from hydrolysis of magnesium wastes reprocessed by mechanical milling under air. Int. J. Hydrogen Energy 2022 vol.47, n°8, p. 5074-5084. (FI=7.2/Q1). WOS / DOI / HAL
ACL-2022-005. Al Bacha S., Farias E. D., Garrigue P., Zakhour M., Nakhl M., Bobet J. L. and Zigah D. Local enhancement of hydrogen production by the hydrolysis of Mg17Al12 with Mg “model” material. J. Alloys Compd. 2022 vol. 895, p. 162560 (8 p.). (FI=6.2/Q2). WOS / DOI / HAL
ACL-2021-148. Al Bacha S., Aubert I., Zakhour M., Nakhl M. and Bobet J.-L. Valorization of AZ91 by the hydrolysis reaction for hydrogen production (Electrochemical approach). J. Magnesium Alloys 2021 vol. 9, n°6, p. 1942-1953. (FI=11.81/Q1). WOS / DOI / HAL
ACL-2021-146. Constantin L., Kraiem N., Wu Z., Cui B., Battaglia J. L., Garnier C., Silvain J. F. and Lu Y. Manufacturing of complex diamond-based composite structures via laser powder-bed fusion. Addit. Manuf. 2021 vol. 40, p. 101927 (9 p.). (FI=11.63/Q1). WOS / DOI / HAL
ACL-2021-144. Piticescu R. R., Slobozeanu A. E., Valsan S., Ciobota C., Ghita A.-N., Motoc A. M., Chiriac S. and Prakasam M. Hydrothermal synthesis of nanocrystalline ZrO2-8Y2O3-xLn2O3 powders (Ln = La, Gd, Nd, Sm): crystalline structure, thermal and dielectric properties. Materials (Basel, Switz.) 2021 vol. 14, n°23, p. 7432 (21 p.). (FI=3.74/Q3). WOS / DOI / HAL
ACL-2021-139. Zhu Q., Fan P., Li N., Carlson T., Cui B., Silvain J.-F., Hudgins J. L. and Lu Y. Femtosecond-laser sharp shaping of millimeter-scale geometries with vertical sidewalls. Int. J. Extreme Manuf. 2021 vol. 3, n°4, p. 045001 (12 p.). (FI=10.36/Q1). WOS / DOI HAL
*ACL-2021-133. Prakasam M., Silvain J. F., Largeteau A. Innovative high-pressure fabrication processes for porous biomaterials—A review. Bioengineering (Basel, Switz.) 2021 vol. 8, n°11, p. 170 (22 p.). (FI=5.04/Q2). WOS / DOI / HAL
ACL-2021-129. Camus-Génot V., Guiet A., Lhoste J., Fayon F., Body M., Kodjikian S., Moury R., Leblanc M., Bobet J. L., Legein C. and Maisonneuve V. Controlled morphology synthesis of nanostructured β-AlF3–x(OH)x with tunable specific surface area. Cryst. Growth Des. 2021 vol. 21, n°10, p. 5914–5927. (FI=4.01/Q1). WOS / HAL / DOI
ACL-2021-127. Mailhé C., Godin A., Veillère A. and Duquesne M. Applicability of infrared thermography for the detection of phase transitions in metal alloys. Appl. Sci. (Basel, Switz.) 2021 vol. 11, n°9, p. 8885 (8 p.). (FI=2.83/Q3). WOS / HAL / DOI
*ACL-2021-124. Legrée M., Charbonnier V., Al Bacha S., Asano K., Sakaki K., Aubert I., Mauvy F. and Bobet J. L. Hydrogen generation by hydrolysis reaction using magnesium alloys with long period stacking ordered structure. Int. J. Hydrogen Energy 2021 vol. 46, n°71, p. 35161-35171. (FI=7.13/Q2). WOS / HAL / DOI
ACL-2021-114. Hanani Z., Ablouh E.-h., Merselmiz S., Ghanbaja J., Amjoud M. b., Mezzane D., Alimoussa A., Lahcini M., Spreitzer M., Vengust D., El Marssi M., Luk’yanchuk I. A., Kutnajk Z. and Gouné M. Morphogenesis mechanisms in the hydrothermal growth of lead-free BCZT nanostructured multipods. CrystEngComm 2021 vol. 23, n°30, p. 5249-5256. (FI=3.75/Q1). WOS / HAL / DOI
ACL-2021-110. Srimark K., Dasari S., Sharma A., Wang P., Gwalani B., Rojhirunsakool T., Gorsse S. and Banerjee R. Hierarchical phase evolution in a lamellar Al7CoCrFeNi high entropy alloy involving competing metastable and stable phases. Scr. Mater. 2021 vol. 204, p. 114137 (7 p.). (FI=6.30/Q1). WOS / HAL / DOI
ACL-2021-106. Joulain A., Audurier V., Galaud P., Bonneville J., Azina C., Lu Y. and Silvain J.-F. Correlation of the mechanical properties of Cu/C composite materials with the chemistry of Cu C interfacial zone. Mater. Charact. 2021 vol. 179, p. 111364 (8 p.). (FI=4.53/Q1). WOS / HAL / DOI
ACL-2021-101. Sharma A., Gwalani B., Dasari S., Choudhuri D., Chang Y.-J., Gorsse S., Yeh A.-C. and Banerjee R. Insights into defect-mediated nucleation of equilibrium B2 phase in face-centered cubic high-entropy alloys. JOM 2021 vol. 73, n°8, p. 2320–2331. (FI=2.59/Q1). WOS / HAL / DOI
ACL-2021-099. Lin C.-L., Lee J.-L., Kuo S.-M., Li M.-Y., Gan L., Murakami H., Mitani S., Gorsse S. and Yeh A.-C. Investigation on the thermal expansion behavior of FeCoNi and Fe30Co30Ni30Cr10-xMnx high entropy alloys. Mater. Chem. Phys. 2021 vol. 271, p. 124907 (9 p.). (FI=4.77/Q2). WOS / HAL / DOI.
ACL-2021-093. Shen Z., Ji G., Addad A., Labrugère C., Lu Y. and Silvain J. F. Tailoring the microstructure of an oriented graphite flake/Al composite produced by powder metallurgy for achieving high thermal conductivity. Diamond Relat. Mater. 2021 vol. 118, p. 108513 (9 p.). (FI=3.80/Q2). WOS / HAL / DOI
*ACL-2021-091. Guené-Girard S., Courtois J., Dussauze M., Heintz J.-M., Fargues A., Roger J., Nalin M., Cardinal T. and Jubera V. Comparison of structural and spectroscopic properties of Ho3+-doped niobate compounds. Mater. Res. Bull. 2021 vol. 143, p. 111451 (9 p.). (FI=5.06/Q2). WOS / HAL / DOI
ACL-2021-086. Bokas G. B., Chen W., Hilhorst A., Jacques P. J., Gorsse S. and Hautier G. Unveiling the thermodynamic driving forces for high entropy alloys formation through big data ab initio analysis. Scr. Mater. 2021 vol. 202, p. 114000 (5 p.). (FI=6.30/Q1). WOS / HAL / DOI
ACL-2021-080. Dasari S., Jagetia A., Sharma A., Nartu M. S. K. K. Y., Soni V., Gwalani B., Gorsse S. and Banerjee R. Tuning the degree of chemical ordering in the solid solution of a complex concentrated alloy and its impact on mechanical properties. Acta Mater. 2021 vol. 212, p. 116938 (16 p.). (FI=9.20/Q1). WOS / HAL / DOI
*ACL-2021-068. Guené-Girard S., Jubera V., Weill F., Roger J., Fargues A. and Heintz J. M. Thermodynamic and experimental approach of the effect of Si on the sintering of Y3NbO7. J. Eur. Ceram. Soc. 2021 vol. 41, n°10, p. 5316-5323. (FI=6.36/Q1). WOS / HAL / DOI
ACL-2021-061. Constantin L., Fan L., Pouey M., Roger J., Cui B., Silvain J.-F. and Lu Y. Spontaneous formation of multilayer refractory carbide coatings in a molten salt media. Proc. Natl. Acad. Sci. U.S.A. 2021 vol. 118, n°18, p. e2100663118 (5 p.). (FI=12.77/Q1). WOS / HAL / DOI
*ACL-2021-045. Silvain J. F., Constantin L., Heintz J. M., Bordère S., Teulé-Gay L., Lu Y., Diot J.-L., De Langlade R. and Feuillet E. Controlling interfacial exchanges in liquid phase bonding enables formation of strong and reliable Cu–Sn soldering for high-power and temperature applications. ACS Appl. Electron. Mater. 2021 vol. 3, n°2, p. 921–928. (FI=4.94/Q2). WOS / HAL / DOI
ACL-2021-037. Dasari S., Chang Y.-J., Jagetia A., Soni V., Sharma A., Gwalani B., Gorsse S., Yeh A.-C. and Banerjee R. Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al2Ti0.3Co1.5CrFeNi1.5 high entropy alloy results in an excellent strength-ductility combination. Mater. Sci. Eng., A 2021 vol. 805, p. 140551 (17 p.). (FI=6.04/Q1). WOS / HAL / DOI
ACL-2021-026. Fan L., Constantin L., Wu Z., McElveen K. A., Chen X. G., He T., Wang F., Debiemme-Chouvy C., Cui B., Lai R. Y., Li X., Silvain J. F. and Lu Y. Laser vibrational excitation of radicals to prevent crystallinity degradation caused by boron doping in diamond. Sci. Adv. 2021 vol. 7, n°4, p. eabc7547 (9 p.). (FI=14.97/Q1). WOS / HAL / DOI
ACL-2021-025. Hachet D., Gorsse S. and Godet S. Microstructure study of cold rolled Al32CoCrFeMnNi high-entropy alloy: Interactions between recrystallization and precipitation. Mater. Sci. Eng., A 2021 vol. 802, p. 140452 (16 p.). (FI=6.04/Q1). WOS / HAL / DOI
ACL-2021-022. Nandihalli N., Liang R., Gorsse S., Mori T., Zhou N. and Kleinke H. Transport properties of a molybdenum antimonide-telluride with dispersed NiSb nanoparticles. Mater. Chem. Phys. 2021 vol. 260, p. 124061 (9 p.). (FI=4.77/Q2). WOS / HAL / DOI
ACL-2021-019. Hanani Z., Izanzar I., Amjoud M. b., Mezzane D., Lahcini M., Uršič H., Prah U., Saadoune I., El Marssi M., Luk’yanchuk I. A., Kutnajk Z. and Gouné M. Lead-free nanocomposite piezoelectric nanogenerator film for biomechanical energy harvesting. Nano Energy 2021 vol. 81, p. 105661 (12 p.). (FI=19.06/Q1). WOS / HAL / DOI
ACL-2021-016. Al Bacha S., Thienpont A., Zakhour M., Nakhl M. and Bobet J. L. Clean hydrogen production by the hydrolysis of magnesium-based material: Effect of the hydrolysis solution. J. Cleaner Prod. 2021 vol. 282, p. 124498 (10 p.). (FI=11.07/Q1). WOS / HAL / DOI
ACL-2021-009. Gorsse S., Chen Y.-T., Hsu W.-C., Murakami H. and Yeh A.-C. Modeling the precipitation processes and the formation of hierarchical microstructures in a single crystal high entropy superalloy. Scr. Mater. 2021 vol. 193, p. 147-152. (FI=6.30/Q1). WOS / HAL / DOI
*ACL-2021-003. Chennabasappa M., Lahaye M., Chevalier B., Labrugère C. and Toulemonde O. A successful process to prevent corrosion of rich Gd-based room temperature magnetocaloric material during ageing. J. Alloys Compd. 2021 vol. 850, p. 156554 (6 p.). (FI=6.37/Q2). WOS / HAL / DOI
ACL-2020-171. Al Bacha S., Pighin S. A., Urretavizcaya G., Zakhour M., Nakhl M., Castro F. J. and Bobet J. L. Effect of ball milling strategy (milling device for scaling-up) on the hydrolysis performance of Mg alloy waste. Int. J. Hydrogen Energy 2020 vol. 45, n° 41, p. 20883-20893. (FI=5.81/Q2). DOI / HAL / WOS
*ACL-2020-166. Prakasam M., Balima F., Noudem J. and Largeteau A. Dense MgB2 ceramics by ultrahigh pressure field-assisted sintering. Ceramics (Basel, Switz.) 2020 vol. 3, n°4, p. 521-532. (FI=0.36/Q3). WOS / HAL / DOI
ACL-2020-164. Borg C. K. H., Frey C., Moh J., Pollock T., Gorsse S., Miracle D. B., Senkov O. N., Meredig B. and Saal J. E. Expanded dataset of mechanical properties and observed phases of multi-principal element alloys. Sci. Data 2020 vol. 7, p. 430 (6 p.). (FI=6.44/Q1). WOS / HAL / DOI
ACL-2020-149. Lê V., Dourges M.-A., Bobet J.-L. and Deleuze H. An innovative approach for on-demand hydrogen generation, and its application to the preparation of kraft black liquor foams. New J. Chem. 2020 vol. 44, n°40, p. 17518-17522. (FI=3.59/Q2). WOS / HAL / DOI
ACL-2020-146. Pontoreau M., Thomas B., Le Guen E., Bourda C., Kraiem N., Andrey L. and Silvain J.-F. Synthesis of composite powders composed of silver and carbon nanotubes by liquid-phase reduction method. Nano-Struct. Nano-Objects 2020 vol. 24, p. 100622 (9 p.). (Non référencé). WOS / HAL / DOI
ACL-2020-138. Lin W.-C., Chang Y.-J., Hsu T.-H., Gorsse S., Sun F., Furuhara T. and Yeh A.-C. Microstructure and tensile property of a precipitation strengthened high entropy alloy processed by selective laser melting and post heat treatment. Addit. Manuf. 2020 vol. 36, p. 101601 (10 p.). (FI=10.99/Q1). WOS / HAL / DOI
ACL-2020-136. Hanani Z., Merselmiz S., Mezzane D., Amjoud M. b., Bradeško A., Rožič B., Lahcini M., El Marssi M., Ragulya A. V., Kutnjak Z. and Gouné M. Thermally-stable high energy storage performances and large electrocaloric effect over a broad temperature span in lead-free BCZT ceramic. RSC Adv. 2020 vol.10, n°51, p. 30746-30755. (FI=3.36/Q2). WOS / HAL / DOI
ACL-2020-120. Al Bacha S., Pighin S. A., Urretavizcaya G., Zakhour M., Castro F. J., Nakhl M. and Bobet J.-L. Hydrogen generation from ball milled Mg alloy waste by hydrolysis reaction. J. Power Sources 2020 vol. 479, p. 228711 (10 p.). (FI=9.12/Q1). WOS / HAL / DOI
*ACL-2020-119. Guené-Girard S., Jubera V., Viers L., Boulesteix R., Maitre A. and Heintz J.-M. Liquid phase synthesis and sintering of Y3NbO7. Ceram. Int. 2020 vol.46, n°16, Part B, p. 26361-26367. (FI=4.52/Q1). WOS / HAL / DOI
ACL-2020-118. Al Bacha S., Aubert I., Zakhour M., Nakhl M. and Bobet J.-L. Hydrolysis properties, corrosion behavior and microhardness of AZ91 “model” alloys. J. Alloys Compd. 2020 vol. 845, p.156283 (10 p.). (FI=5.31/Q1). WOS / HAL / DOI
ACL-2020-116. Mahon T., Gaudin É., Nassif V. and Tencé S. Structural and magnetic properties of the interstitial carbide-hydride NdScSiC5H0.2. J. Alloys Compd. 2020 vol. 844, p. 156105 (8 p.). (FI=5.31/Q1). WOS / HAL / DOI
ACL-2020-113. Al Bacha S., Desmedt A., Zakhour M., Nakhl M. and Bobet J.-L. Mechanism of hydrogen formation during the corrosion of Mg17Al12. Electrochem. Commun. 2020 vol.119, p. 106813 (5 p.). (FI=4.72/Q2). WOS / HAL / DOI
ACL-2020-111. Loudjani N., Gouasmia T., Bounoudina M. and Bobet J.-L. Phase formation and magnetic properties of nanocrytalline Ni70Co30 alloy prepared by mechanical alloying. J. Alloys Compd. 2020 vol. 846, p. 156392 (11 p.). (FI=5.31/Q1). WOS / HAL / DOI
ACL-2020-098. Dasari S., Jagetia A., Soni V., Gwalani B., Gorsse S. and Banerjee R. Engineering transformation pathways in an Al3CoFeNi complex concentrated alloy leads to excellent strength–ductility combination. Mater. Res. Lett. 2020 vol.8, n°11, p. 399-407. (FI=7.32/Q1). WOS / HAL / DOI
ACL-2020-089. Pontoreau M., Le Guen E., Bourda C. and Silvain J.-F. Optimization of highly concentrated dispersions of multi-walled carbon nanotubes with emphasis on surfactant content and carbon nanotubes quality. Nanotechnology 2020 vol. 31, n°40, p. 405707 (10 p.). (FI=3.87/Q3). WOS / HAL / DOI
ACL-2020-083. Chen Y.-T., Chang Y.-J., Murakami H., Gorsse S. and Yeh A.-C. Designing high entropy superalloys for elevated temperature application. Scr. Mater. 2020 vol. 187, p. 177-182. (FI=5.61/Q1). WOS / HAL / DOI
ACL-2020-080. Hanani Z., Mezzane D., Amjoud M. b., Gagou Y., Hoummada K., Perrin C., Razumnaya A. G., Kutnjak Z., Bouzina A., El Marssi M., Gouné M. and Rožič B. Structural, dielectric, and ferroelectric properties of lead-free BCZT ceramics elaborated by low-temperature hydrothermal processing. J. Mater. Sci. : Mater. Electron. 2020 vol. 31, p. 10096-10104. (FI=2.47/Q3). WOS / HAL / DOI
ACL-2020-078. Dasari S., Chaudhary V., Gwalani B., Jagetia A., Soni V., Gorsse S., Ramanujan R. V. and Banerjee R. Highly tunable magnetic and mechanical properties in an Al3CoFeNi complex concentrated alloy. Materialia 2020 vol. 12, p. 100755 (6 p.). (Non référencé). WOS / HAL / DOI
*ACL-2020-076. Motoc A. M., Valsan S., Slobozeanu A. E., Corban M., Valerini D., Prakasam M., Botan M., Dragut V., Vasile B., Surdu A. V., Trusca R., Grilli M. L. and Piticescu R. R. Design, fabrication, and characterization of new materials based on zirconia doped with mixed rare earth oxides: review and first experimental results. Metals (Basel, Switz.) 2020 vol. 10, n°6, p. 746 (23 p.). (FI=2.35/Q2). WOS / HAL / DOI
*ACL-2020-075. Legree M., Sabatier J., Mauvy F., Awad A. S., Faessel M., Bos F. and Bobet J.-L. Autonomous hydrogen production for proton exchange membrane fuel cells PEMFC. J. Energ. Power Technol. 2020 vol.2, n°2, p. 1-18. (Non référencé). WOS / HAL / DOI
ACL-2020-073. Al Bacha S., Aubert I., Devos O., Zakhour M., Nakhl M. and Bobet J.-L. Corrosion of pure and milled Mg17Al12 in “model” seawater solution. Int. J. Hydrogen Energy 2020 vol. 45, n°32, p.15805-15813. (FI=5.81/Q2). WOS / HAL / DOI
ACL-2020-069. Bhattacharyya A., Rodière P., Vaney J.-B., Biswas P. K., Hillier A. D., Bernardini F., Tencé S., Adroja D. T., Cano A. Evidence of nodal superconductivity in LaFeSiH. Phys. Rev. B 2020, vol. 101, n°22, p. 224502 (6 p.). (FI=4.03/Q2). WOS / HAL / DOI
ACL-2020-067. Jenkins B. M., Danoix F., Gouné M., Bagot P. A. J., Peng Z., Moody M. P., Gault B. Reflections on the analysis of interfaces and grain boundaries by atom probe tomography. Microsc. Microanal. 2020, vol. 26, n°2, p. 247-257. (FI=4.12/Q2). WOS / HAL / DOI
ACL-2020-065. Pighin S. A., Urretavizcaya G., Bobet J.-L. and Castro F. J. Nanostructured Mg for hydrogen production by hydrolysis obtained by MgH2 milling and dehydriding. J. Alloys Compd. 2020 vol. 827, p. 154000 (9 p.). (FI=5.31/Q1). WOS / HAL / DOI
ACL-2020-063. Hanani Z., Merselmiz S., Danine A., Stein N., Mezzane D., Amjoud M. b., Lahcini M., Gagou Y., Spreitzer M., Vengust D., Kutnjak Z., El Marssi M., Luk’yanchuk I. A. and Gouné M. Enhanced dielectric and electrocaloric properties in lead-free rod-like BCZT ceramics. J. Adv. Ceram. 2020 vol.9, n°2, p. 210-219. (FI=6.7/Q1). WOS / HAL / DOI
ACL-2020-062. Dasari S., Jagetia A., Chang Y.-J., Soni V., Gwalani B., Gorsse S., Yeh A.-C. and Banerjee R. Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al5Co1.5CrFeNi1.5 high entropy alloy. J. Alloys Compd. 2020 vol.830, p. 154707 (15 p.). (FI=5.31/Q1). WOS / HAL / DOI
ACL-2020-060. Al Bacha S., Zakhour M., Nakhl M. and Bobet J.-L. Effect of ball milling in presence of additives (Graphite, AlCl3, MgCl2 and NaCl) on the hydrolysis performances of Mg17Al12. Int. J. Hydrogen Energy 2020 vol.45, n°11, p. 6102-6109. (FI=5.81/Q2). WOS / HAL / DOI
ACL-2020-057. Constantin L., Wu Z., Li N., Fan L., Silvain J.-F. and Lu Y. Laser 3D printing of complex copper structures. Addit. Manuf. 2020 vol. 35, p. 101268 (9 p.). (FI=10.99/Q1). WOS / HAL / DOI
ACL-2020-042. Constantin L., Fan L., Pontoreau M., Wang F., Cui B., Battaglia J.-L., Silvain J.-F., Lu Y. F. Additive manufacturing of copper/diamond composites for thermal management applications. Manuf. Lett. 2020, vol. 24, p. 61-66. (Non référencé). WOS / HAL / DOI
ACL-2020-040. Aoued S., Danoix F., Allain S. Y. P., Gaudez S., Geandier G., Hell J.-C., Soler M. and Gouné M. Microstructure evolution and competitive reactions during quenching and partitioning of a model Fe-C-Mn-Si alloy. Metals (Basel, Switz.) 2020 vol. 10, n°1, p. 137 (22 p.). (FI=2.35/Q2). WOS / HAL / DOI
ACL-2020-038. Allain S. Y. P., Gaudez S., Geandier G., Danoix F., Soler M. and Gouné M. Carbon heterogeneities in austenite during Quenching & Partitioning (Q&P) process revealed by in situ High Energy X-Ray Diffraction (HEXRD) experiments. Scr. Mater. 2020 vol. 181, p.108-114. (FI=5.61/Q1). WOS / HAL / DOI
ACL-2020-036. Shen Z., Ji G. and Silvain J.-F. From 1D to 2D arrangements of graphite flakes in an aluminium matrix composite: Impact on thermal properties. Scr. Mater. 2020 vol.183, p.86-90. (FI=5.61/Q1). WOS / HAL / DOI
ACL-2020-034. Dasari S., Gwalani B., Jagetia A., Soni V., Gorsse S. and Banerjee R. Hierarchical eutectoid nano-lamellar decomposition in an Al3CoFeNi complex concentrated alloys. Sci. Rep. 2020 vol.10, p. 4836 (15 p.). (FI=4.37/Q1). WOS / HAL / DOI
*ACL-2020-026. Prakasam M., Morvan A., Azina C., Constantin L., Goglio G., Largeteau A., Bordère S., Heintz J.-M., Lu Y. and Silvain J.-F. Ultra-low temperature fabrication of copper carbon fibre composites by hydrothermal sintering for heat sinks with enhanced thermal efficiency. Composites, Part A 2020 vol. 133, p. 105858 (10 p.). (FI=7.66/Q1). WOS / HAL / DOI
ACL-2020-024. Chamroune N., Delange F., Caillault N., Morvan F., Lu Y., Kawasaki A. and Silvain J.-F. Synergetic effect of discontinuous carbon fibers and graphite flakes on thermo-mechanical properties of aluminum matrix composites fabricated by solid–liquid phase sintering. Met. Mater. Int. 2020 vol. 26, n°2, p. 155-167. (FI=3.64/Q1). WOS / HAL / DOI
ACL-2020-020. Khair M., Riglet-Martial C., Matheron P., Lechelle J., Palancher H., Iltis X., Tarisien N. and Heintz J.-M. In situ control of oxygen partial pressure in a buffered UO2 fuel: A manufacturing process. J. Eur. Ceram. Soc. 2020 vol. 40, n°4, p. 1626-1638. (FI=5.30/Q1). WOS / HAL / DOI
ACL-2020-018. Constantin L., Fan L., Zou Q., Thomas B., Roger J., Heintz J.-M., Debiemme-Chouvy C., Mortainge B., Lu Y. and Silvain J.-F. Design of tailored oxide-carbide coating on carbon fibers for a robust copper/carbon interphase. Carbon (New York, N. Y.) 2020 vol. 158, p. 607-614. (FI=9.59/Q1). WOS / HAL / DOI
ACL-2020-015. Silvain J.-F., Heintz J.-M., Veillere A., Constantin L. and Lu Y. A review of processing of Cu/C base plate composites for interfacial control and improved properties. Int. J. Extreme Manuf. 2020 vol. 2, n°1, p. 012002 (21p.). (Non référencé). WOS / HAL / DOI
ACL-2020-010. Yang G., Liu L., Wang T., Fan L., Huang X., Tian D., Jiang L., Silvain J.-F. and Lu Y. Laser-induced breakdown spectroscopy of ammonia gas with resonant vibrational excitation. Opt. Express 2020 vol. 28, n°2, p. 1197-1205. (FI=3.89/Q1). WOS / HAL / DOI
ACL-2020-009. Wijayanti I. D., Mølmen L., Denys R. V., Nei J., Gorsse S., Young K., Guzik M. N. and Yartys V. The electrochemical performance of melt-spun C14-Laves type TiZr-based alloy. International Journal of Hydrogen Energy 2020 vol. 45, n°6, p. 1297-1303. (FI=5.81/Q2). WOS / HAL / DOI
ACL-2020-004. Kiran Kumar Yadav Nartu M. S., Alam T., Dasari S., Mantri S. A., Gorsse S., Siller H., Dahotre N. and Banerjee R. Enhanced tensile yield strength in laser additively manufactured Al3CoCrFeNi high entropy alloy. Materialia 2019 vol. 9, p. 100522 (9 p.). (Non référencé). WOS / HAL / DOI
Chapitres, ouvrages, direction et coordination
Total : 4
*OS-2023-02. Legrée M., Bobet J. L., Sabatier J. and Mauvy F. Génération d’hydrogène par hydrolyse en présence de magnésium. Techniques de l’Ingénieur. Énergie 2023 n° RE188, 20 pages. Lien
OS-2022-05. Allain S. Y. P., Pushkareva I., Teixeira J., Gouné M. and Scott C. Dual-phase steels: the first family of advanced high strength steels. In : Encyclopedia of materials : metals and alloys. edited by F. G. Caballero, G. Miyamoto and M. C. Gao. Amsterdam : Elsevier, 2022. Vol. 2. p. 37-62. ISBN 978-0-12-819733-2. DOI / HAL
*OS-2022-02. Largeteau A., Prakasam M. (editors). Spark plasma synthesis under high pressure for advanced materials [on line]. Basel, Switzerland: MDPI, 2021-2022. Numéro Spécial de : Materials (Basel, Switz.), 2021-2022, vol. 14(19), vol. 15(14). Lien / HAL
OS-2020-01. De Formanoir C., Godet S., Gouné M., Bordère S., Gorsse S. Fabrication additive de pièces en titane par fusion sélective de lit de poudre. Techniques de l’Ingénieur. Matériaux 2020, n° BM 7930, 21 pages. Lien / HAL
Brevets
BR-2020-04. COMMISSARIAT A L’ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES ; CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE (Fr.) ; UNIVERSITE DE BORDEAUX (Fr.) ; INSTITUT POLYTECHNIQUE DE BORDEAUX (Fr.). Procédé de fabrication par frittage d’une pièce en un alliage CCA nitruré. Peyrouzet F., Navonne C., Gorsse S. France Brevet FR 3096988. 2020. 28 p.
BR-2020-03. COMMISSARIAT A L’ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES ; CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE (Fr.) ; UNIVERSITE DE BORDEAUX (Fr.) ; INSTITUT POLYTECHNIQUE DE BORDEAUX (Fr.). Alliage CCA nitruré à durcissement structural. Peyrouzet F., Navonne C., Gorsse S. France Brevet FR 3096990. 2020. 31 p.
BR-2020-02. COMMISSARIAT A L’ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES ; CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE (Fr.) ; UNIVERSITE DE BORDEAUX (Fr.) ; INSTITUT POLYTECHNIQUE DE BORDEAUX (Fr.). Procédé de fabrication additive d’une pièce en un alliage CCA nitruré. Peyrouzet F., Navonne C., Gorsse S. France Brevet FR 3096989. 2020. 28 p.
Extension : European Patent EP 3747573 (05-06-2020).
Proceedings, extended abstracts, article ou chapitre de vulgarisation…
Total : 2
ACLN-2022-06. Zahid M., Kharraz O., Amjoud M. B., Mezzane D., Gouné M., Hoummada K., Saadoune I., Fourcade S., Stocker P., Rožič B., Kutnjak Z. and El Marssi M. Low-temperature synthesis and characterization of lead-free BaTi89Sn0.11O3 piezoelectric powders. Materials Today: Proceedings 2022 vol.62, Part 11, p. A8-A14. DOI / HAL
*ACLN-2020-03. Bronchy M., Souriau J.-C., Heintz J.-M., Feautrier C., Henry D., Duguet E., Mendizabal L., Simon G. and Tréguer-Delapierre M. Low-temperature silver sintering by colloidal approach. In : 2020 IEEE 8th Electronics System-Integration Technology Conference (ESTC), 15-18 September 2020, Tønsberg, Vestfold, Norway. Red Hook (N. Y.) : IEEE, 2020. 5 pages. ISBN 978-1-7281-6293-5. WOS / DOI / HAL
Thèses
Total : 13
T 2023-14. Moussa M. Vers une meilleure compréhension du mécanisme d’absorption de l’hydrogène dans les alliages multicomposants à haute entropie de composition HfTiNbVZr. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2023. SUDOC
T 2023-10. Alabd K. Étude d’intermétallique électrures de structure type CeScSi : modification des propriétés par insertion topotactique d’éléments légers (H, O et F) et application comme catalyseurs pour la synthèse de l’ammoniac. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2023. SUDOC
T 2023-03. Brillon A. Matériaux composites Al/B4C pour le domaine de l’énergie nucléaire. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2023. SUDOC
T 2022-20. Bident A. Élaboration de matériaux composites cuivre/graphene à propriétés physiques améliorées élaborés par métallurgie des poudres. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2022. SUDOC
T 2022-19. Sourd J. Synthèses, mesures physiques et modélisation de composés intermétalliques RTSiH (R=La, Ce, T=Fe, Ru) à électrons fortement corrélés : supraconductivité, cohérence Kondo et magnétisme quantique. Th. Doct. : Lasers, Matière et Nanosciences : Université de Bordeaux : 2022. TEL
T 2022-16. Legrée M. Étude d’un procédé de production d’hydrogène in-situ sous haute pression par hydrolyse en présence de magnésium. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2022. TEL
T 2022-05. Peyrouzet F. Développement de l’alliage à haute entropie Al0,3CoCrFeNi par frittage Spark Plasma Sintering et Fusion Laser sur Lit de Poudre. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2022. SUDOC
T 2021-14. Hachet D. Traitement thermomécanique de l’alliage concentré complexe Al0.3CoCrFeMnNi : Interactions entre déformation, recristallisation et précipitation. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : Université Libre de Bruxelles : 2021. TEL
T 2020-15. Shen Z. Fabrication, architecture design, and characterization of a new Al/graphite flakes (Gf) composite used for thermal management. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2020. TEL
T 2020-14. Al Bacha S. Générateur d’Hydrogène « vert » pour mobilité légère ou de courte distance. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2020. TEL
T 2020-13. Hanani Z. Conception de composite flexible céramique sans plomb/biopolymère pour des applications de stockage et de récupération d’énergie Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2020. TEL
T 2020-06. Pontoreau M. Fabrication de matériaux composites innovants base argent renforcés par des nanotubes de carbone par différents procédés de mise en forme. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2020. SUDOC
T 2020-05. Constantin L. Fabrication additive assisté laser de matériaux composites 3d et revêtement diamant par cvd. Th. Doct. : Physico-Chimie de la Matière Condensée : Université de Bordeaux : 2020. TEL